Carpet cleaning can be a chore, but there are some methods that are easier than others. Along with the variety of methods comes a variety of machines too. Many machines don’t have to be purchased, renting one for an hour or so is also an option. The information included in this article should be helpful in choosing which method is best for you.

Foam Method – A special machine needs to be rented or purchased for this type of cleaning. It looks similar to a buffer, with the brushes working small amounts of foam into the carpet. After the foam dries, it can be sucked up with a vacuum cleaner. The drying generally takes around two hours.

Shampooing Method – Shampooing carpets was the first method used when people began to clean carpets. The foam method and this one are very similar. The machine is almost the same, but this one has hosed attached to suck the water through. There is a container attached to the shampooer that has a tank for water and one for shampoo solution.

These are both mixed as they come out of the wand. The carpet is squirted with solution, the bristles on the wand work it into the carpet, then it is sucked back out. Once the water going from the carpet to the reservoir begins to become clear, that area of the carpet is clean. It will take many times to get high traffic areas clean.

Bonnet Cleaning – This method includes placing what looks like a bonnet over the base of a buffer-like machine. The bonnet is soaked in a cleaning solution before it goes over the buffer. As the bonnet goes over the carpet, dirt is picked up. Eventually, the bonnet will need to be rinsed out and re-dipped before placing it back onto the machine. Drying time is about 30 minutes for this bonnet process.

Dry – Many professionals use this method of cleaning carpets. There is no drying time included, just a 15 minute wait after the solvent has been sprinkled over the carpet. After the solvent has been put on the carpet, a machine with two brushes goes over the area with the powder. The last step in this process is taking the vacuum and sucking up the powder out of the carpet.

Steam Method – There are professionals who use this method too, for a deep cleaning effect. Hot water is generally used, instead of steam, even though this method is known as steam cleaning. Water is first sprayed onto the carpet with a wand, then sucked up with the same wand.

Some steam machines have clear hoses, so the water being taken off the carpet can be viewed. Seeing clear water running through the hose is a good indicator that the dirt has been successfully removed from the carpet. Many machines today have such strong suction that the drying time is very short.

Before beginning the carpet cleaning process, it is beneficial to vacuum all the carpet area to be cleaned. This will get a lot of the loose dirt out and save cleaning time. It is also easier to remove all furniture from the areas to be cleaned, whether they are being cleaned professionally or with a home machine.

Looking for a professional carpet cleaning service? Here at Denver Carpet Cleaning we specialize in all your carpet cleaning problems.

categories: Carpet cleaning,carpet cleaners,carpet cleaning Emergency,commercial carpet cleaning,residential carpet cleaning,cleaning,cleaner,carpet,rug,stain,Home Improvement,Home Repair,Home remodeling,Home